5
WHAT’S IN THE BOX?
3x ROX
1x ROXBase
1x ROXBase
3x ROXStraps
3x ROXStraps
6x ROXStraps
6x ROXStraps
6x ROXClaw
6x ROXClaw
1x Charging System
3x ROXPro
3x ROXProX
6x ROXPro
6x ROXProX
3PCS SET
3PCS SET
6PCS SET
6PCS SET
HOW TO CHARGE ROX
If you charge with a ROXBase:
1 · Find the power adapter and plug it into a power socket.
2 · Charge all the ROX by placing them on the charging base, with the
front side of the ROX facing towards the front side of the base. If they
are properly placed, they will flash red (empty), yellow (half full) or
green (full). A full charging cycle takes between 3-5 hours.
3 · Once ROX continuous light in green, take them off the charging base
and they are ready to go.
Notes:
• Make sure the ROX are not wet when placed on the charging base or
when connected with a charging cable.
• Do not remove the foam inserts that hold the ROX in position.
• Keep the cover open during the charging process.
• In case ROX do not blink red, yellow or green while charging, check if
they are properly placed on the charging base or if the charging cables
are properly connected (in case you are using a charging cable), and
that the adapter is properly plugged into the socket.
If you charge with a charging cable:
1 · Plug the power adapter into a power socket.
2 · Plug the magnetic head of the cable into the charging slot on ROX
(see drawing). If the cable is properly connected, ROX will flash red
(empty), yellow (half full) or green (full). A full charging cycle takes
between 3-5 hours.
3 · Once ROX flash green, take them off the charging cable and they are
ready to go.
EN
1x Charging Bag
1x Charging Bag
Summary of Contents for ROX
Page 1: ...USER MANUAL ROX SYSTEM...
