A-Collection Vivere II, Installation Instructions Manual

Things to check before you start

Ensure there are no hidden service pipes and cables where you intended to drill.

Take care not to overtighten any of the screws.

Decide on the appropriate location for your product.

This product contains glass. Care must be taken when fitting or handling to prevent personal injury or 
damage to the product.

Cable

Check the colour of the cables:
• Blue:neutral (N)
• brown:live wire(L)
• Yellow/Green: Earth ( )
Connect the terminal box (not included)to the mians as follows:
• The live wire to the ‘’L’’terminal .
• The neutral wire to the’’N’’terminal.
• The earth wire to the’’ ‘’terminal.
• Insert the terminal box in the hole in the wall after connecting to the power supply.

Maintenance

• Always turn off lamp before cleaning
• The luminaire can be cleaned with a dry cloth. Do not immerse in water.
If the light does not light up after installation:
• Ensure all connections have been made according to the installation instructions.

The 3 golden rules for care

1.

 Use dry clean cloth to clean the surface of the product.

2.

 Do not leave any standing water on the mirror cabinet. Remove any water immediately.

3.

 Never use any solvents, scourers, abrasives, bleach, acids, strong detergents, aggressive chemical 

cleaners or solvent-type cleaning solutions on the product.

Regular Checking

•  Check to ensure that all components and fixings of this product are secure, do not use if you have any 

doubts about its fitness for purpose.

EN

IM_Mirror cabinet Vivere II_A4_191014.indd   4

2019-10-14   13:16