©
2005 A+ Corporation, LLC. All rights reserved.
SCC-38M-InsInstallationOperation_100318
An ISO 9001:2008 certified company
2
Technical Specifications
Dimensions
Back View
Side View
PORT D
3.700”
0.355”
1.250”
DIA.
3.256”
0.883”
3.700”
1.876”
2.626”
2.000”
2.625”
4.270”
4.995”
MINIMUM MAINTENANCE CLEARANCE 8.100”
OPTIONAL
MOUNTING
BRACKET
Technical Specifications
Maximum recommended
membrane flow rate
(For higher flow rates contact the factory)
Outside Diameter: ~ 1.4”
Inside Diameter: ~ 1.0”
Length: ~ 2.5”
Lowest possible pressure consistent with application
Machined parts: 316/316L stainless steel / NACE compliant
All other metal parts: stainless steel / NACE compliant
Sealing material: Fluoroelastomer standard
Membrane: inert
2,000 psig
1/4” female NPT
185˚F (85˚C) for Type 6 membrane
302˚F (150˚C) for Type 7 membrane
1,000 cc/min for Type 6 membrane
3,600 cc/min for Type 7 membrane
*Maximum flow results in approximately 2 psi membrane differential pressure
Maximum recommended
supply pressure
Port sizes
5
Number of ports
50 cc
Internal volume
Wetted materials
Maximum pressure rating
Element size
Maximum temperature
35 psig*
*Slowly open the supply pressure so that the minimum differential
pressure required to shut off the Liquid Block™ is not met or exceeded.
Maximum Liquid Block™
valve auto-reset pressure
