FUNCTIONS
A Designs Audio
Owners Manual MP -A Series
Edition 3.0
January, 2005
Caution - Caution Sign is a warning that extreme heat will create damage to the Tubes. Please make
sure you have proper spacing in the Rack. We recommend 1x spacing if used in a Rack mount. Or
you can place the MP Series on the top tier of your Rack. Not allowing proper air flow voids the
factory warranty.
XLR Outputs - The XLR output is balanced out and you have the option to change the output ohms
from the face of the MP Series (600 ohms/ 10k) by using the OUTPUT Switch located on the front
panel of the MP Series. XLR's are clearly marked indicating which Channel is being used.
XLR Inputs - The XLR input is used for Microphones. You can use the inputs for other instruments. If
you are using a condenser Microphone, please make sure your Phantom Power is in the on position.
The Phantom Power switch is located on the front panel. (See Illustration 1). XLR's are clearly
marked indicating which Channel is being used.
Serial Number - If this serial number is removed or tampered with, your warranty will be void.
