A.H. Systems SAS-547 Biconical Antenna
OPERATING INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
The SAS-547 Biconical Antenna is shipped completely assembled.
MOUNTING INSTRUCTIONS
The SAS-547 biconical antenna is supplied with an ABC-TD Balun mounting
clamp. The ABC-TD has a 1/4-20 mounting holes on the base of the clamp.
Attach the antenna to the ABC-TD mounting clamp, azimuth and elevation head
(AEH-510) through the screw hole in the antenna base. The azimuth and
elevation head (AEH-510) mounts to the tripod (ATU-510) top and allows the
antennas to be rotated 360 degrees and tilted between horizontal and vertical
polarization. Each tripod leg is independently adjustable in angle and length to
facilitate antenna height setting. The tripod legs have a rubber tip on one end
for indoor or hard surface use, and a metal spike on the other end for outdoor
soft surface (such as dirt) use.
A.H. Systems inc. – Nov 2014
REV B
6
Summary of Contents for SAS-547
Page 10: ...A H Systems SAS 547 Biconical Antenna TYPICAL DATA A H Systems inc Nov 2014 REV B 10 ...
Page 11: ...A H Systems SAS 547 Biconical Antenna A H Systems inc Nov 2014 REV B 11 ...
Page 12: ...A H Systems SAS 547 Biconical Antenna A H Systems inc Nov 2014 REV B 12 ...
Page 13: ...A H Systems SAS 547 Biconical Antenna A H Systems inc Nov 2014 REV B 13 ...
