MUFFIN TOASTER MT-12
7
P/N 1010610 Rev. Q 07/16
McDonald’s
Unpacking
1. Remove unit and all packing materials from
shipping carton.
2. Open the large box. It should contain the
following items:
• Muffin Toaster with Crumb Tray
• Information Packet
3. Remove information packet.
4. Remove all packing materials and protective
coverings from the unit.
NOTE: If any parts are missing or damaged, con-
tact A.J. Antunes IMMEDIATELY at 1-630-784-1000
or in the U.S. or Canada, 1-800-253-2991 toll free.
5. Clean the toaster with a damp cloth. Remove
and clean the crumb tray.
Location
When placing the toaster into service, pay attention to
the following guidelines.
• Make sure the power is off and the unit is at room
temperature before plugging in the power cord.
• Do NOT block or cover any openings on the unit.
• Do NOT immerse the power cord or plug in water.
• Keep the power cord away from heated surfaces.
• Do NOT allow the power cord to hang over edge
of table or counter.
Plug the power cord into the appropriate power outlet.
Refer to the specification plate for the proper voltage.
INSTALLATION
Figure 1. Muffin Toaster MT-12
CAUTION
All electrical service connections must be in accor-
dance with local electrical codes and any other appli-
cable codes.
Partial
Load
READY
Crumb
Tray
Front Door
Control Knob
Partial Load
Indicator Light
(Amber)
Indicator Light (Green)
Removable
Plate
Partial Load Timer Control Knob