ADVANCED SECURITY LEVEL
3. Modify wireless network settings.
Go to
WIRELESS
menu and choose
Channel/SSID/Security
.
Change new name to wireless network (
SSID
)
and write it down to page
9
.
Change
SSID Broadcast
to
DISABLE
Note! Network name can not contain any
special characters or spaces.
Choose
WPA/WPA2
to Allowed Client Type.
Change below settings to
WPA/WPA2
menu.
Cypher suite =
Mixed
Authentication =
Pre-shared Key
Pre-shared key type =
Passphrase (8~63 characters)
Pre-shared Key = <
Type password here
>
Press
Save Settings
bottom-edge of the page.
Note! Type Pre-shared Key about 8 - 63 characters long
password. Write your password to page 9 for future use
with your computer.
In
WIRELESS
menu choose
Access Control
.
Choose
Yes
to
Enable MAC Filtering
. Choose
Allow
to
Access Rule for registered MAC addresses.
Enter
wireless LAN card MAC addresses from all computers
which will access to this access point.
(Wireless LAN card
MAC can be found ex. in Win2000/XP with IPCONFIG
/ALL command)
When you have added all MAC addresses, press
Save
Settings
bottom-edge of page.
Note!
Check MAC addresses from your computer
Wireless
LAN adapter
on
Wireless Network Connection
. Do not
add modem MAC address to this list.
Note!
You can also press
Add currently associated MAC stations
button, when all computers connected
wirelessly to AP will be added automatically to the access list.
You can remove network cable now. Wireless network will work right when
WPA/WPA2
encryption
password is entered to computer wireless network settings. You can find instructions from pages
12 - 13
.
11
Summary of Contents for V100AP
Page 15: ...Pika asennusohje V100AP 15 ...