3. Activate wireless network
(This step show how wireless network can be activated)
Note!
If you can not access to the V100AP management web page
, you need to change IP address to
static from computer network settings as below. After all wireless settings have been configured; remember to change
computer network settings to get IP address automatically as in step
1.
has been told.
Windows 2000/XP
1. Go to
Start
->
Settings
->
Network and Dial-Up Connections.
2. Move mouse over
Local Area Connection
icon and press right hand button on mouse. Choose
Properties.
3. Choose
Internet Protocol (TCP/IP)
-> Press
Properties.
4. Choose
Use the following IP address.
5. Add IP-address
10.0.0.1
, subnet mask
255.255.255.0
and gateway
10.0.0.2
6. Leave
Preferred DNS server
and
Alternate DNS server
blank.
7. In properties of Internet Protocol (TCP/IP), press
OK.
8. Press
OK
in Network settings.
(If windows need to be restarted, press
Yes
)
Windows Vista
1. Go to
Start
->
Network.
2. Press
Network and Sharing Center
button and then press
Manage network connections
link.
3. Move mouse over
Local Area Connection
icon and press right hand button on mouse. Choose
Properties
4. Choose
Internet protocol version 4 (TCP/IPv4)
-> Press
Properties.
5. Choose
Use the following IP address.
6. Add IP-address
10.0.0.1
, subnet mask
255.255.255.0
and gateway
10.0.0.2
7. Leave
Preferred DNS server
and
Alternate DNS server
blank.
8. In properties of Internet Protocol (TCP/IP), press
OK.
9. Press
OK
in Network settings.
Mac OS
1. Open
AppleTalk -controller
, choose
Ethernet
connection.
2. Open
TCP/IP -controller
and modify these settings:
Connection =
Ethernet
: Definition =
Manual
IP-address =
10.0.0.1
Subnet mask =
255.255.255.0
Gateway =
10.0.0.2
3. Save settings.
Linux RedHat 8.0
1. Open
Start Here
from desktop, go to
System Settings
and
Network.
2. In Devices, double click mouse’s left hand button on top of your Network adapter.
3. Choose
Statically set IP addresses
and add following:
Address =
10.0.0.1
Subnet mask =
255.255.255.0
Default Gateway Address =
10.0.0.2
4. Press
Ok
.
7
Summary of Contents for V100AP
Page 15: ...Pika asennusohje V100AP 15 ...
