27
Under
standing err
or messages
/
26
Met
er memory
/
Step 2
Use the ► button to scroll
through the test results,
starting from the most re-
cent and ending with the
oldest.
Press the
◄
button to re-
turn to the results seen pre-
viously.
After checking the stored
test results, press the ●
button to turn off the meter.
/ 7.2
Viewing test results stored in memory
Press any button to turn the meter on. The
current date and time will be displayed on
the bottom of the screen followed by the
1 day average value and the number of
the test results saved within the current
day.
NOTE: The control solution test results saved with the symbol will be displayed
with the symbol when you review the stored test results.
/ 8
Understanding error messages
A used test strip was inserted.
>
Repeat the test with a new test strip.
The blood or control solution sample was
applied before the
symbol appeared.
>
Repeat the test with a new test strip
and wait until the
symbol appears
before applying the blood or control so-
lution sample.
The temperature during the test was abo-
ve or below the operating range.
>
Move to an area where the temperature
is within the operating range (5–45 ˚C)
and repeat the test after the meter and
test strips have reached a temperature
within the operating range.
The blood sample has abnormally high
viscosity or insufficient volume.
>
Repeat the test with a new test strip.
The
number
of tests
within
the
current
day
►
button
◄ button
