background image

4

OPERATION CONTROLS & FUNCTIONS

TRANSMITTER

FRONT PANEL

q

 POWER SWITCH: 

Press this switch to power on/off the device.

w

 POWER LED: 

When the device is powered on, the red power LED will be on. 

e

 IN LED: 

When the HDMI IN port connects an active source device, the green LED will be on.

r

 

LOOP LED: 

When the HDMI LOOP OUT port connects an active display device, the green LED will be on.

t

 OUT LED (1~8): 

When the HDMI OUT port connects an active display device, the corresponding green OUT LED will be on.

BACK PANEL

q

 AUDIO OUT (COAX, L/R):

 Coaxial/analog audio output port, connect to amplifer or speaker.

w

 HDMI PORT: 

IN: 

HDMI input port, connect to HDMI source device such as DVD or set-top box with an HDMI cable. 

LOOP OUT:

 HDMI loop output port, connect to the HDMI display device such as TV or Monitor with an HDMI cable.

e

 CAT OUTPUT PORT (1~8): 

Connect to the CAT IN port of the CAT receiver with a CAT cable.

r

 

LINK SIGNAL INDICATOR LAMP (GREEN): 

Illuminate:

 Transmitter and receiver are connected.

Dark:

 Transmitter and receiver are not connected.

t

 DATA SIGNAL INDICATOR LAMP (ORANGE): 

Illuminate:

 There is signal transmission between the transmitter and the receiver.

Dark:

 No signal transmission.

y

 IR OUT:

 

Connect the IR Blaster cable to transmit IR signal from the CAT receiver.

u

 DC 12V: 

Plug the DC 12V power supply into the unit and connect the adaptor to an AC outlet. 

(

Note:

 The transmitter can power the receiver via a CAT cable.)

A

  

NEU

VIDEO

Summary of Contents for ANI-0108POE-AU

















Reviews: