19
WebGUI Control
WebGUI Control
Install the Device Discovery Tool:
Please obtain the Device Discovery software from your authorized dealer and save it in a directory where you can easily find it.
NOTE:
The unit’s default IP address is 192.168.1.50
Connects the unit and your PC/Laptop to the same active network and execute the Device Discovery
software. Click on
“Find Devices on Network”
and a list of devices connected to the local network
will show up indicating their current IP address.
By clicking on one of the listed devices you will be presented with the network details of that particular
device. If you choose, you can alter the static IP network settings for the device, or switch the unit
into DHCP mode to automatically obtain proper network settings from a local DHCP server. To switch
to DHCP mode, please select DHCP from the IP mode drop-down, then click
“Save”
followed by
“Reboot”
.
Once you are satisfied with the network settings, you may use them to connect via Telnet or WebGUI.
The network information window provides a convenient link to launch the WebGUI directly.
Login to the WebGUI:
By default, both the Username and Password are
“admin”
for the WebGUI. The administrator password
can be changed within the
“User Config”
tab of the
WebGUI if desired.
The above function tabs will always display on left side
of the WebGUI to aid with navigation.
A
NEU
VIDEO
Summary of Contents for ANI-1082UHD-KIT
Page 33: ...CONNECTION DIAGRAM CONNECTION DIAGRAM MAIN UNIT A NEUVIDEO 31 ...
Page 34: ...32 CONNECTION AND INSTALLATION CONNECTION AND INSTALLATION RECEIVER A NEUVIDEO ...
Page 35: ...IR CABLE PIN ASSIGNMENT IR Cable Pin Assignment A NEUVIDEO 33 ...