9
Serial Commands
COMMAND
DESCRIPTION AND PARAMETERS
GET IN N1 EDID
8
Show the EDID currently being used on the specified input.
N1
= 1~3 [HDMI input number]
GET IN EDID LIST
8
List all available EDID selections.
SET USER N1 EDID DATA
N2
8
Upload a new EDID (in ASCII hex format) for use as the
specified User EDID.
N1
= 1~3 [User EDID number]
N2
= {Comma delimited hex pairs} [EDID data]
GET USER N1 EDID DATA
8
Show the current contents of the specified User EDID as
HEX data.
N1
= 1~3 [User EDID number]
Note:
Commands will not be executed unless followed by a carriage return.Commands are not
case-sensitive.
Summary of Contents for ANI-3AUTOHDMI
Page 12: ...CONNECTION DIAGRAM 10...
