13
WebGUI Control
WebGUI Control
DEVICE DISCOVERY:
Please obtain the
“Device Discovery”
software from your
authorized dealer and save it in a directory where you can
easily find it. Connect the unit and your PC/Laptop to the
same active network and execute the
“Device Discovery”
software. Click on
“Find Devices on Network”
and a list of devices connected to the local network will show up indicating their current
IP address.
NOTE:
The unit’s default IP address is 192.168.1.50.
By clicking on one of the listed devices you will be presented with the network details of that
particular device.
1. IP Mode:
If you choose, you can alter the static IP network settings for the device, or switch
the unit into DHCP mode to automatically obtain proper network settings from a local DHCP
server. To switch to DHCP mode, please select DHCP from the IP mode drop-down, then click
“Save”
followed by
“Reboot”
.
2. WebGUI Hotkey:
Once you are satisfied with the network settings, you may use them to
connect via Telnet or WebGUI. The network information window provides a convenient link to
launch the WebGUI directly.
WEBGUI OVERVIEW:
By default, both the Username and Password are
“admin”
for the WebGUI. The administrator
password can be changed within the
“System Settings”
tab of the WebGUI if desired. The
following function tabs will always display on left side of the WebGUI to aid with navigation.
NOTE:
The unit’s default IP address is 192.168.1.50.
All primary functions of this unit are controllable via the built in WebGUI, including Input, Output, Windowing,
Audio, EDID Settings, User Config, and System settings. The individual functions will be introduced in the
following sections.
A
NEU
VIDEO
