16
WebGUI Control
WebGUI Control
1. Quad View:
Quad View displays (4) equally sized windows.
Each window has an independently selected source. Audio
always follows the source selected in the Audio tab.
NOTE:
See
“Features Support Chart”
on Pg. 2 for supported
Input/Output resolutions.
• Window Source:
To change the source for a specific
window,
click on the dropdown next to the window to change (1~4) and
select the preferred Input. The switch will occur immediately.
2. 3+1 View:
The 3+1 View displays (1) large window to the
right and (3) equally sized, but smaller, windows on the left.
Each window has an independently selected source and the
aspect ratio of the video in each window can be changed.
Audio always follows the source selected in the Audio tab.
NOTE:
See
“Features Support Chart”
on Pg. 2 for supported
Input/Output resolutions.
• Window Source:
To change the source for a specific
window,
click on the dropdown next to the window to change (1~4) and
select the preferred Input. To change the aspect ratio of the
source, as displayed within the window, click on the second
dropdown and select
“Full”, “16:9”,
or
“4:3”
. The switch or
format change will occur immediately.
3. Side By Side:
The Side by Side mode displays (2) equally
sized windows next to each other. Each window has an
independently selected source and the aspect ratio of the
video in each window can be changed. Audio always follows
the source selected in the Audio tab.
NOTE:
See
“Features Support Chart”
on Pg. 2 for supported
Input/Output resolutions.
• Window Source:
To change the source for a specific
window,
click on the dropdown next to the window to change (1~2) and
select the preferred Input. To change the aspect ratio of the
source, as displayed within the window, click on the second
dropdown and select
“Full”, “16:9”
, or
“4:3”
. The switch or
format change will occur immediately.
4. PiP (Picture in Picture):
The PiP mode displays (1) full
screen window in the background with a 2nd, freely sizable
and positioned window on top of it. Each window has an
independently selected source. Audio always follows the
source selected in the Audio tab.
NOTE:
See
“Features Support Chart”
on Pg. 2 for supported
Input/Output resolutions.
• Window Source:
To change the source for a specific
window,
click on the dropdown next to the window to change (1~2) and
select the preferred Input. The switch will occur immediately.
• PiP Size:
There are (2) ways to change the size of the PiP
window. Clicking on the bottom right corner of the PiP window
and dragging it will resize the window freely. For more precise
adjustments, move the width and height sliders. The height
and width values cannot exceed the horizontal or vertical size
of the currently selected output resolution. Changes will occur
immediately.
A
NEU
VIDEO
