19
WebGUI Control
WebGUI Control
When in DHCP mode, the unit will attempt to connect to a local DHCP server and obtain IP, netmask and gateway addresses automatically.
Please press
“Save”
after making any changes to the IP configuration or mode.
NOTE:
The unit’s default IP address is 192.168.1.50. If the IP address is changed then the IP address required for WebGUI/Telnet access
will also change accordingly.
4. Download Current Configuration:
The current system configuration, including routing and presets, may be saved as an JSON file to
a PC. Click the
“Download”
button to save the current system configuration to your local PC.
5. Restore Configuration:
Previously saved system configurations may be restored from a saved JSON file. Click the
“Choose File”
button to locate the saved JSON file, then click the
“Restore”
button.
6. Reset to Default:
Press the
“ALL Reset”
button to reset the unit to its factory default state. After the reset is complete, the unit will
reboot automatically.
7. Firmware Upgrade:
To update the unit’s firmware, click the
“Choose File”
button to open the file selection window and then select
the firmware update file (*.bin format) located on your local PC. After selecting the file, click the
“Upgrade”
button to begin the firmware
update process.
ADMIN - LOGOUT:
Clicking the red
“Logout”
tab will automatically log the currently connected user out of the WebGUI and
return to login page.
A
NEU
VIDEO
