15
OSD MENU
OSD MENU
u
NETWORK:
The Network MENU will display the IP address.
i
SOFTWARE UPDATE:
The switcher supports Software Updates via USB flash disk. The procedure is as follows:
1. Copy the file
“MERGE.bin”
to the root directory of a USB flash disk. (Make sure the file is copied to the root directory. The
“MERGE.
bin”
file is provided/authorized by our engineering department or from our website)
2. Plug the USB flash disk to the switcher USB port on its rear panel.
3. Press the
MENU>software update>YES
enters to start the update. The OSD will display the update process.
o
RESOLUTION:
The switcher HDMI output resolutions support multiple modes. Press the
“RES”
button on the IR remote, the resolution
menu will be displayed. The user can select suitable resolution for HDTV or monitor. Auto means that the HDMI resolutions based on the
EDID information read from the display device.
A
NEU
VIDEO
