9
Telnet Control
Telnet Control
Before attempting to use the Telnet control, please ensure that both the Matrix (via the
‘LAN /CONTROL’
port) and the PC/Laptop are
connected to the same active networks. To access the Telnet control in Windows 7, click on the
‘Start’
menu and type
“cmd”
in the search
field then press
ENTER
. Under Mac OS X, go to
Go→Applications→Utilities→Terminal
. See below for reference.
Once in the command line interface (CLI) type
“telnet”
, then the IP address of the unit and
“23”
, then hit
ENTER
.
This will bring us into the unit which we wish to control. Type
“help”
to list the available commands.
NOTE:
Commands will not be executed unless followed by a carriage return. Commands
ARE
case-sensitive. If the IP is changed then
the IP Address is required for Telnet access will also change accordingly.
A
NEU
VIDEO