4
RS-232 Control & Telnet Control
RS-232 Protocol
UNIT
CONTROLLING PC
SERIAL PORT SETTINGS
Pin
Assignment
Pin
Assignment
Baud Rate
19200
1
1
Data Bits
8
2
TxD
2
RxD
Parity Bit
None
3
RxD
3
TxD
Stop Bits
1
4
4
Flow Control
None
5
GND
5
GND
6
6
7
7
8
8
9
9
Telnet Control
Before attempting to use Telnet control, please ensure that both the unit and the PC are connected to the same active networks.
UNIT
Windows 7
Click
START
, type
“cmd”
in the search field, and press
ENTER
.
Windows XP
Click
START
> Run, type
“cmd”
, and press
ENTER
.
Mac OS X
Click
GO
>
APPLICATIONS
>
UTILITIES
>
TERMINAL
.
Once in the Command Line Interface (CLI) type
“telnet”
followed by the IP address of the unit (and the port number if it is non-standard)
and then hit
“Enter”
. See below for reference.
Note:
The unit’s default IP address is 192.168.1.50. If the IP address is changed then the IP address required for Telnet access will also
change accordingly.
A
NEU
VIDEO
