A-Neuvideo ANI-HDB70X, Instruction Manual

3

FEATURES / SPECIFICATIONS

FEATURES

• POC (Power Over Cable) function is supported, either TX or RX is powered by 24V@1A 

power supply, the another does not need power supply from the DC jack

• POC Power consumption is less than 10W
• Use single UTP LAN cable (CAT5E/6) to substitute HDMI cable to achieve long distance 

transmission

• UTP termination follows the standard of direct interconnection method
• 

Transmission distance: Over CAT6 cable

• 230 ft / 

70M: 1080p@60Hz@36bit; 3D 1080p@30Hz@36bit

• 

131 ft / 40M: 1080p@60Hz@48bit; 1080p@120Hz@24bit; 3D 1080p@60Hz@36bit; 

4K2K@30Hz@24bit

• 

Support display resolutions up to 4K2K@30Hz

• 

Full HD support: 1080p@60Hz@48bit/pixels, 1080p@120Hz@24bit/pixels, 

3D 1080p@60Hz and 4K2K@30Hz@24bit

• Transfer Bidirectional Infrared control signal together with the HDMI signal
• Transfer Bidirectional RS-232 control signal together with the HDMI signal

Specifications

• Frequency Bandwidth:

 297MHz [10.2Gbps]

• Transmitter Input/Output:

• HDMI Female port / CAT6
• IR Tx / IR Rx / Phoenix

• Receiver Input/Output Ports:

• HDMI Female port / CAT6
• IR Tx / IR Rx / Phoenix

• Power Supply:

 DC 24V 1A

• ESD Protection: Human Body Model:

• ±8kV (air-gap discharge)
• ±4kV (contact discharge)

• Dimensions (WxDxH): 

2.6 x 4.5 x .7 in (65x115x17mm)

• Weight (x2): 

7 oz / 200g

• Operating Temperature:

 0°C ~ 40°C / 32°F ~ 104°F

• Storage Temperature:

 -20°C ~ 60°C / -4°F ~ 140°F

• Relative Humidity:

 20~90% RH (Non-condensing)

• Power Consumption (Max): 

20W

As product improvements are continuous, specifications are subject to change 

without notice.