USE AND MAINTENANCE MANUAL
Page 11 of 13
®
3.4
EQUIPMENT AND CONDITIONS NEEDED TO WORK
Painting operations
MUST
be carried out in an appropriate spray booth equipped with a
filtering system. Do not use the spray gun if the filtering system is not activated. Always wear
protection gloves, goggles, breathing filters with active carbon and adequate clothing for the
protection of the entire body.
3.5
SAFETY PROCEDURES DURING USE
TO USE
the painting unit
STRICTLY OBSERVE
the following precautions and safety criteria.
ASTURO ORIGINALI MAVES Spa
declines every responsibility whatsoever in case the
user does not observe said precautions and safety criteria; furthermore, it is not responsible
for any kind of negligence when using the equipment.
WARNING
I
Always wear protective gloves, masks, breathing filters with activated carbon and
adequate clothing for the protection of the entire body when using the spray gun.
I
The spray gun is employed with paints and thinners which are higly inflammable, therefore,
use the spray gun in well ventilated areas and avoid any action which might start a fire
(eg. smoking, high temperature slags or shavings, sparks or electric elements).
I
CHECK the chemical compatibility of the products on their technical safety charts. Further
information on the materials which make up the spray gun are available, on request, at
ASTURO ORIGINALI MAVES Spa
.
I
The use of products which contain organic solvents might cause intoxication because of
the created toxic vapours.
I
DO NOT USE the unit with food or medicines.
I
DO NOT EXCEED the indicated maximum working pressure (see section 2.3).
I
BEFORE starting on any dismantling, cleaning, maintenance or assembly operation
DISCHARGE the pressure in the hoses (see section 4.1).
I
Never aim the spray gun at anything other than the surface you intend to spray.
IMPORTANT
DO NOT USE the unit with HALOGENATED HYDROCARBON thinners (eg.
Ethylchloride, Trichloride, etc.) which might explode when in contact with
aluminum or galvanized parts.
