* Flow rate depends on variable factors such as feed water pressure, feed water characteristics and
condition of the membranes and filters.
** Recovery and TDS reduction percentages also depend on variable factors such as life and
condition of the membranes and filters, feed water pressure, feed water characteristics
*** If Input Pressure exceeds 30 psi, a pressure reducing valve needs to be installed at the feed line. If
the pressure is lower than 7 psi, a booster pump needs to be installed.
Technical Specifications
Model
Puritee RO
Product Dimensions (H x D x W)
505 mm x 321 mm x 331 mm
Net Weight
8.8 kgs (approx.)
Gross Weight
11.9 kgs (approx.)
Flow rate* Upto
15 litres per hour
Storage tank capacity
9 litres (approx.)
Purification technology
RO (Reverse Osmosis)
5 Stage Purifying Technology
Pre-PP PP CB RO
membrane and + PAC filter
Membrane type
Thin film composite RO membrane
Material of construction for plastic
Food safe, non-toxic, engineering grade
parts plastics
Pump type
Diaphragm pump, 24VDC, 0.26 Amps,
Operating Pressure 125 psi (Max.)
Input Voltage
150 – 300 VAC, 50 Hz
Power rating (Max)
48 Watts
System input pressure***
7 psi to 30 psi
% Recovery**
Upto 30%
TDS reduction**
≥95% (approx.)
Input water temperature
5°C to 45°C
21
Input feed water quality for the optimum performance of your product
Parameter
Maximum
TDS
2000 ppm
Total hardness
500 ppm
Turbidity
5 NTU
System input pressure
30 psi
