Safety
Your safety and the safety of your loved ones is paramount. There are several safety
related messages in this manual, which have been provided during various stages such
as the installation, operation and maintenance of your Puritee RO water purifier. These
messages point out potential hazards and also educate on how to reduce any potential
risks. Please always read and follow all safety messages as provided in this manual.
General Instructions
These instructions have been written as a guide for the proper installation and operation
of your Puritee RO water purifier. A. O. Smith will not accept any liability where these
instructions have not been followed. However, for your safety and to avoid damage
caused by improper installation, it is recommended that water purifier must be installed
by a A. O. Smith Company Service technician only.
Before proceeding with the installation instructions:
1. Inspect the Puritee RO water purifier and its component parts for possible damage.
DO NOT install or attempt to repair any damaged component parts. If you detect
any damage in your Puritee RO water purifier please contact the company through
call centre, details of which are mentioned in this manual and on the product.
2. Verify that the voltage being supplied corresponds to that which is mentioned in the
Puritee RO water purifier manual.
IMPORTANT
03
This is the safety alert symbol. This symbol alerts you to potential
hazards that can hurt you and others. All safety messages will follow
the safety alert symbol and either the word “DANGER” or “WARNING”.
Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury or property damage.
DANGER
CAUTION
WARNING