7
A1-M-XL
2.5 VIBRATIONS
In standard conditions conformed to the indication of machine proper utilization the vibrations do not create
dangerous conditions. The average quadratic weighed level, according to the acceleration frequency to which
arms are exposed does not exceed 2,5 m/s
2
.
2.6 NOISE EMISSIONS
In standard working conditions the Machine noise power level is:
• Acoustic Continuous Equivalent weighed pressure A
<70dB
• Acoustic Istantaneous weighed pressure level
<130dB
In case of any machine modification, the above mentioned levels could be changed.
2.7 TECHNICAL DATA
Frame Height (min. max.):
mm 6-80 / 1/4” - 3 5/32”
Frames Width (min. max.):
mm 6-70/ 1/4” - 2 3/4”
Storage capacity:
n. 220
Standard Wedge size:
7mm - 10mm - 15mm
Optional Wedge size:
3mm - 5mm - 12mm
Weight:
approx. 50 kg / 110 lbs
Height of work bench:
1000mm / 39”
Overall dimensions:
400mm x 500mm x 1410mm
15
3
/
4
” x 19
11
/
16
” x 55
33
/
64
”
2.8 EQUIPMENT SUPPLIED
The equipment listed below are the standard ones:
2.8.1 Standard accessories
Once you have removed the packaging, please check the presence of the following accessories:
• N.1 nail head mm. 7
• N.1 nail head mm.10
• N.1 nail head mm.15
• N.1 L shaped pressure pad
• N.1 Rounding pressure pad
• N.1 Allen Wrench 5 mm. for nails head replacement
• N.1 Brass rod magnet to remove nails
2.8.2 Optional accessories
This machine can be ‘custom-made’ to meet our users’ requirements, by using additional accessories that can make
frame assembling easier: e.g. special fences for peculiar moulding shapes, special clamps to ensure the mouldings
are locked properly during wedge firing, and so on. You can have your local machine shop make these for you.
Summary of Contents for A1-M-XL
