IKEA PAX
25 mm
6. Install the handles with the brass screws through the
pre-drilled holes (4 or 5 screws depending on height)
with a flat head screwdriver. Do not use a power drill.
IKEA
KOMPLEMENT
3. Install the top panel with four screws per frame from the inside
of the cabinet. In the front drill the screw in between the two holes.
In the back drill the screw in front of the hole in the back. The top
panel should stand out of the front of the cabinet frame by 25mm.
4. Secure the wardrobe to the wall using brackets and
mounting screws, according to IKEA's instructions.
5. Install the hinges following IKEA’s instructions.
Then attach the doors.
Front side of
the cabinet frame
Top panel
