12
DMA8825 / DMA8813 / DMA8425 / DMA8413
English
Control Panel
The control panel menu offers complete control of input
channels. This menu includes level and gain controls,
metering, and a host of other parameters that can be
edited�
Channel Name:
A pre-selected channel name can be
viewed or edited in this screen�
Fader:
The input level can be adjusted using this onscreen
fader�
OUT:
The input and output signal level of the channel can
be viewed through these meters. They can be adjusted
between pre- and post-fader meters.
GR:
The gain reduction meter will provide a real-
time indication of any reduction in gain applied by the
internal DSP processes (including compressors-limiters,
equalizers, etcetera).
Limiter:
This button will activate the internal limiter function for the corresponding channel.
Pre/Post:
This button allows you to adjust the output meter between a pre-fader and post-fader meter.
Duck:
Activate the ‘ducking’ feature by pushing this button. The duck function can be activated as ducker 1, ducker 2, or
off, the settings of which are decided by their respective menus.
INV:
This button will invert the phase of the corresponding signal.
ON/OFF:
This button will turn the corresponding channel
on and off�
Bridged:
When the speaker outputs are wired for bridge
mode, users must push this button to bridge the outputs
of the two channels�
Network
There are two pages under this tab.
Security
The menus found under this page may vary depending on
the method of control being used.
Onboard Control
User Account Profile
You can create user accounts within this tab. Once a
User Name and Password are defined, click “SAVE”
to store�
Remote Control From PC
Enter necessary information to log in�
Default values are:
IP Address:
192�168�10�200
User Name:
USER_1
Password:
ASYSTEMS
