A-Tach # 20025
Designed for:
RAM Trucks 1500-5500 2013 - 2018
ST-1
A
-Tach
Mobile Device Mounts
NOTICE:
A-Tach Mounts will not be responsible for
any damage to the vehicle due to the installation
and/or use of the product. The product has been
tested to fit securely to the listed vehicles.
Instructions are provided for your convenience.
You are responsible for the use of the product and
to determine if you have the skill to attach the
product without causing damage to your vehicle or
the product.
Read all instructions and view the photos before
attaching this product.
WARNING:
Please hold the vehicle mount and holster over the place where the solution attaches to the
dash
BEFORE
securely attaching it to the vehicle. This will insure you like the fit and location of the solution.
(1) The holster comes with a two part securing strap
for the hand gun. Place your hand gun into the
holster. Then snap the two parts of the strap
together and place the strap in a position that will
secure the hand gun into the holster.
(2) Slide the hooked parts of the Velcro on the
strap into the slots on the sides of the holster.
Using the included blue card stock will help. The
strap is adjustable by the distance the straps are
inserted into the slots. Be sure to align the hooked
parts of the Velcro with the mesh parts to create a
secure connection.
(3) Attach the
holster to the
mount by inserting
the clip arm on the
mount through the
clip slot on the
side of the holster.
Photo is for
illustration and
might not show
the actual mount.
(4) The top of
the mount
will attach
into the seam
illustrated in
the photo to
the left. It is
to the left of
the steering
wheel and
between the
upper and
lower dash panels.
Returns
Before any product may be returned, A-Tach's must give prior approval. An RMA# (Return Merchandise
Authorization Number) needs to be given to the buyer to return a product. All returns must be within (30) days of
the invoice date and include proof of purchase. Any returned product must be undamaged and in like new
condition. Returned product must be scratch free with no additional holes or screw marks on the product.
A-Tach reserves the right to withhold any refund if the product is believed to be damaged. A return must include a
copy of the original order or invoice. All parts and components that were shipped with the original product must be
included with the returned.