(4) The lower side of the mount will attach with a
screw that holds the bottom of the dash panel to
the truck frame. See arrow in photo. Remove the
screw with a Phillips screw driver.
(5) Inspect the area the SAMS will attach to ensure
it will not be an obstruction. Clean the area where
the mount will attach. Remove the covering from
the tape. With the included seam tool gently press
the dash panel open.
(4) Open the seam just enough to insert the thin
upper edge of the mount into the opened seam.
(See Photo) The tape will not leave any residue if
the mount is removed in the future.
(5) Flex the mount down so the hole in the bottom
of the mount aligns with the hole the dash screw
was removed from. Securely fasten the mount and
dash panel back on with the screw.
A-Tach Mounts Limited Warranty
A-Tach warrants the product to be free of all defects in materials and workmanship for a period of six (6) months
from the date of purchase. This warranty extends to the original buyer. Damaged products caused by anything
outside of shipping damage are not covered by this warranty.
Within the period of this warranty, A-Tach has the option to repair or replace the item or refund the purchase price.
Any replacement parts will be done on an exchange basis. All repairs and service must be done by A-Tach. Product
must be delivered to A-Tach during the warranty time along with proof of purchase price and date. The shipping
and packaging costs will be the buyer’s responsibility. Labor costs and parts to repair will be A-Tach Mounts
responsibility.
A-Tach Mounts will not be responsible for any damage to the vehicle or product due to the installation and/or use of
the product. A-Tach is not responsible for damages caused by extreme heat conditions. Any above exclusion may
not apply in states that do not allow the exclusion or limitation. This warranty gives you specific legal rights. You
also may have other rights which vary from state to state.
Returns
Before any product may be returned, A-Tach must give prior approval. An RMA# (Return Merchandise
Authorization Number) needs to be given to the buyer to return a product. All returns must be within (30) days of
the invoice date and include proof of purchase. Any returned product must be undamaged and in like new
condition. Returned product must be scratch free with no additional holes or screw marks on the product.
A-Tach reserves the right to withhold any refund if the product is believed to be damaged. A return must include a
copy of the original order or invoice. All parts and components that were shipped with the original product must be
included with the returned product.
Contact Information:
A-Tach Mounts / Clarkston, WA 99403 / cs@atachmounts.com
