6253M Mainboard Chapter 3 Award BIOS Setup
INTEGRATED PERIPHERALS
This section page includes all the items of IDE
hard drive and Programmed Input/Output features. See also Section “Chipset Features
Setup”.
ROM PCI/ISA BIOS
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
IDE HDD Block Mode
: Enabled
Onboard Serial Port 2
: 3F8/IRQ3
IDE Primary Master PIO
: Auto
UART Mode Select
: Normal
IDE Primary Slave PIO
: Auto
RxD , TxD Active
: Hi, Lo
IDE Secondary Master PIO
: Auto
IR Transmission Delay
: Enabled
IDE Secondary Slave PIO
: Auto
Onboard Parallel Port
: 378/IRQ7
IDE Primary Master UDMA
: Auto
Onboard Parallel Mode
: ECP
IDE Primary Slave UDMA
: Auto
ECP Mode Use DMA
: 3
IDE Secondary Master UDMA : Auto
EPP Mode Select
: EPP1.7
IDE Secondary Slave UDMA : Auto
PWRON After PWR-Fail : Off
On-Chip Primary PCI IDE
: Enabled
On-Chip Secondary PCI IDE : Enabled
USB Keyboard Support
: Disabled
Init Display first
: PCI Slot
Power On Function
: Button Only
KB Power On Passward
: Enter
Esc: Quit
áâß
: Select Item
Hot Key Power On
:Ctrl-F1
F1 : Help PU/PD/+/-
: Modify
KBC input clock
: 8 MHz
F5 : Old Values (Shift) F2: Color
Onboard FDC Controller
: Enabled
F6 : Load BIOS Defaults
Onboard Serial Port 1
: 3F8/IRQ4
F7 : Load Setup Defaults
IDE HDD Block Mode
This allows your HD controller to use the fast block mode to
transfer data to and from your HD drive.
Enabled
IDE controller uses block mode .
Disabled
IDE controller uses standard mode.
IDE Primary Master/Slave PIO IDE; Secondary Master/Slave PIO
PIO - Programmed Input/Output, it allows the BIOS to tell the controller what it
wants and then let the controller and the CPU to complete the task by themselves.
This is simpler and faster. Your system supports five modes, 0 - 4, which primarily
differ in timing. When
Auto
is selected, the BIOS will select the best available mode.
IDE Primary Master/Slave UDMA; IDE Secondary Master/Slave UDMA
Auto,
will support the Ultra DMA function. Disabled, will not support the Ultra DMA
