06/2021
Page 19
Installation and Operating Instructions
UPS Edition One 6kVA, 10kVA
4.3.4 Battery capacity setting
Battery capacity setting
(
NOTE:
Inside the broken-line
is the flashing part)
If you press the DOWN key under the frequency setting or the UP key under the battery
quantity setting, you will reach the battery capacity setting. You can select the battery
capacity setting as follows:
■
Press ENTER /ON to enter the value setting status.
Press UP & DOWN to select the different battery capacities and press ENTER/ON to
confirm. The battery capacity range is 1-200Ah.
NOTE:
By pressing UP or DOWN for a long time, the battery capacity can be quickly
reduced.
■
Use the UP & DOWN keys to go to the frequency setting or to set the battery quantity.
4.3.5 Battery quantity setting
Battery quantity setting
(
NOTE:
Inside the broken-line
is the flashing part)
If you press the DOWN button under the
battery capacity setting or the UP button
under the bypass voltage cap setting, you
will reach the battery quantity setting.
You can select the battery quantity setting as
follows:
■
Press ENTER /ON to enter the value setting status.
Press UP & DOWN to select another battery quantity and press ENTER/ON to confirm.
The battery quantity range is selectable between 16, 18, or 20.
■
Use the UP & DOWN key to access the battery capacity setting or to set the upper limit
of the bypass voltage.