Digital Video Recorder User Manual
Figure 8-11 Video Tampering Interface
Step 2 Check the checkbox of
Enable Video Tampering Detection
.
Step 3 Drag the sensitivity bar and choose a proper sensitivity level.
Step 4 Click
to set handling method of video tampering. Set arming schedule and alarm
response actions of the channel.
1) Click
Arming Schedule
tab to set the arming schedule of response action.
2) Select one day of a week and up to eight time periods can be set within each day.
Time periods shall not be repeated or overlapped.
Figure 8-12 Set Arming Schedule of Video Tampering
3) Select
Linkage Action
tab to set alarm response actions of video tampering alarm (please
refer to
Chapter 8.7 Setting Alarm Response Actions
).
Repeat the above steps to set arming schedule of other days of a week. You can also use
Copy
button to copy an arming schedule to other days.
4) Click the
OK
button to complete the video tampering settings of the channel.
118
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
