Digital Video Recorder User Manual
9.2 Vehicle Detection
Purpose
Vehicle Detection is available for the road traffic monitoring. In Vehicle Detection, the passed
vehicle can be detected and the picture of its license plate can be captured. You can send alarm
signal to notify the surveillance center and upload the captured picture to FTP server.
Step 1 Enter the VCA settings interface.
Menu> Camera> VCA
Step 2 Select the camera to configure the VCA.
You can check the checkbox of
Save VCA Picture
to save the captured pictures of VCA
detection.
Step 3 Select the VCA detection type to
Vehicle Detection
.
Step 4 Check the Enable checkbox to enable this function.
to configure the trigger channel, arming schedule, linkage action and PTZ linking.
Step 5 Click
The PTZ linking is only applicable to other list, not to whitelist and blacklist.
Step 6 Click the
Rule Settings
to enter the rule settings interface. Configure the lane, upload
picture and overlay content settings. Up to 4 lanes are selectable.
Figure 9-1 Rule Settings
Step 7 Click
Save
to save the settings.
Refer to the User Manual of Network Camera for the detailed instructions for the vehicle
detection.
9.3 Line Crossing Detection
Purpose
This function can be used for detecting people, vehicles and objects cross a set virtual line. The line
crossing direction can be set as bidirectional, from left to right or from right to left. And you can set
the duration for the alarm response actions, such as full screen monitoring, audible warning, etc.
126
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
