Digital Video Recorder User Manual
Step 1 Enter the
Network Settings
interface.
Menu > Configuration > Network
Step 2 Select the
PPPoE
tab to enter the
PPPoE Settings
interface.
Figure 11-2 PPPoE Settings Interface
Step 3 Check the
Enable PPPoE
checkbox to enable this feature.
Step 4 Enter
User Name
and
Password
for PPPoE access.
The User Name and Password should be assigned by your ISP.
Step 5 Click the
Apply
button to save the settings.
Step 6 After successful settings, the system asks you to reboot the device to enable the new
settings, and the PPPoE dial-up is automatically connected after reboot.
You can go to Menu > Maintenance > System Info > Network interface to view the status of
PPPoE connection.
12.2.1Configuring Guarding Vision
Purpose
Guarding Vision provides the mobile phone application and the service platform page
(www.guardingvision.com) to access and manage your connected DVR, which enables you to get a
convenient remote access to the surveillance system.
The Guarding Vision can be enabled via operation on SADP software, GUI and Web browser. We
introduce the operation steps on GUI in this section.
Step 1 Enter the
Network Settings
interface.
Menu > Configuration > Network
Step 2 Select the
Platform Access
tab to enter the Guarding Vision Settings interface.
Figure 11-3 Guarding Vision Settings
144
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
