Digital Video Recorder User Manual
The settings available in this menu include:
Video Output Interface:
Selects the output to configure the settings.
You can select
Main CVBS
and
HDMI/VGA
for video output interface.
Live View Mode:
Selects the display mode to be used for Live View.
Dwell Time:
The time in seconds to
dwell
between switching of channels when enabling
auto-switch in Live View.
Enable Audio Output:
Enables/disables audio output for the selected camera in the live view
mode.
Volume:
Adjusts the volume of the audio output.
Event Output:
Designates the output to show event video. If available, you can select a
different video output interface from the Video Output Interface when an event occurs.
Full Screen Monitoring Dwell Time:
Sets the time in seconds to show alarm event screen.
Step 2 Set the camera order.
1) Click
View
tab and select the
Video Output Interface
from the drop-down list.
Figure 3-9 Live View-Camera Order
2) Click a window to select it, and then double-click a camera name in the camera list you
would like to display. Setting an ‘X’ means the window will not display any camera.
3) You can also click
to start live view of all channels in order and click
to stop live
view of all channels. Click
or
to go to the previous or next page.
4) Click the
Apply
button.
3.5 Manual Video Quality Diagnostics
Purpose
The video quality of the analog channels can be diagnosed manually and you can view the
diagnostic results from a list.
55
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
