Digital Video Recorder User Manual
Step 2 Configure Motion Detection:
1) Choose camera you want to configure.
2) Check the checkbox after
Enable Motion Detection
.
3) Drag and draw the area for motion detection by mouse. If you want to set the motion
detection for all the area shot by the camera, click
Full Screen
. To clear the motion
detection area, click
Clear
.
Figure 5-13 Motion Detection- Mask
4) Click
, and the message box for channel information pops up.
Figure 5-14 Motion Detection Settings
5) Select the channels which you want the motion detection event to trigger recording.
6) Click
Apply
to save the settings.
7) Click
OK
to back to the upper level menu.
8) Exit the
Motion Detection
menu.
Step 3 Configure the schedule.
Please refer to the step 4 of
Chapter 5.2 Configuring Recording Schedule
,
while you may
choose Motion as the record type.
5.4 Configuring Alarm Triggered Recording and Capture
Purpose
Follow the procedure to configure alarm triggered recording or capture.
Step 1 Enter the
Alarm Setting
interface.
75
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
