Digital Video Recorder User Manual
6) If the encoding parameters can also be used to other channels, click
Copy
and choose the
channel you want to apply the settings.
5.9 Configuring HDD Group
Purpose
You can group the HDDs and save the record files in certain HDD group.
Step 1 Enter HDD setting interface.
Menu>HDD>Advanced
Step 2 Select
Storage Mode
tab.
Check whether the storage mode of the HDD is Group. If not, set it to Group. For detailed
information, please refer to
Chapter 12.3 Managing HDD Group
.
Step 3 Select
General
in the left bar.
Click
to enter editing interface.
Step 4 Configuring HDD group.
1) Choose a group number for the HDD group.
2) Click
Apply
to save your settings.
3) Click
OK
to back to the upper level menu.
Step 5 Repeat the above steps to configure more HDD groups.
Step 6 Choose the Channels which you want to save the record files in the HDD group.
1) Enter
Storage Mode
interface.
Menu>HDD>Advanced> Storage Mode
Figure 5-28 HDD Advanced
2) Choose Group number in the drop-down list of
Record on HDD Group
3) Check the channels you want to save in this group.
4) Click
Apply
to save settings.
83
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
