Digital Video Recorder User Manual
Figure 9-5 Draw Area for Intrusion Detection
Step 8 Click
Apply
to save the settings.
The sudden scene change detection and the intrusion detection cannot be enabled at the same
channel.
9.5 Region Entrance Detection
Purpose
Region entrance detection function detects people, vehicle or other objects which enter a
pre-defined virtual region from the outside place, and some certain actions can be taken when the
alarm is triggered.
Step 1 Enter the VCA settings interface.
Menu> Camera> VCA
Step 2 Select the camera to configure the VCA.
You can check the checkbox of
Save VCA Picture
to save the captured pictures of VCA
detection.
Step 3 Select the VCA detection type to
Region Entrance Detection
.
Step 4 Check the
Enable
checkbox to enable this function.
Step 5 Click
to configure the trigger channel, arming schedule, linkage action and PTZ linking
for the region entrance detection alarm.
130
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
