Digital Video Recorder User Manual
Figure 2-35 Activate the Camera
Step 3 Set the password of the camera to activate it.
Use Admin Password:
When you check the checkbox, the camera (s) will be configured
with the same admin password of the operating DVR.
Create New Password:
If the admin password is not used, you must create the new
password for the camera and confirm it.
Figure 2-36 Set New Password
STRONG PASSWORD RECOMMENDED
-We highly recommend you create a strong password of
your own choosing (Using a minimum of 8 characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters.) in order to
increase the security of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly can better protect
your product.
Step 4 Click
OK
to finish the acitavting of the IP camera. And the security status of camera will be
changed to
Active
.
2.7.2 Adding the Online IP Camera
Purpose
Before you can get a live view or record of the video, you should add the network cameras to the
connection list of the device.
41
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
