Page 7
1.9
Troubleshooting
TO REDUCE THE RISK OF ELECTRIC SHOK, DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONELLE.
•
The monitor does not respond after you turn on the system.
•
Make sure that the monitor is turned on.
•
Turn off the power and check the monitor’s power cord, AC adapter,
•
and signal cable for proper connection.
•
Appear the “ No Input the Signal"
•
Check the connecting of the audio cable between the monitor and the computer.
•
Appear the “ Input Not the Supported"
•
Input signal are insuperable, reset the video mode.
•
The appearance is not at the screen center.
•
Use “AUTO ADJUST”, refer to the Controls section.
•
The characters on the screen are too dim or too bright
•
Choose fit color temperature, use “AUTO COLOUR ADJUST or manually adjust
•
“RGB ADJUSTMENT, refer to the Control section.
