5
3. Installation
The ECO-12 has 12 inputs which allows you to combine up to 12 signals
within 5 to 1000MHz. The two cables that’s included has to be connected to
get the signals from the inputs to the output. Connect one of the cables from
“A”
to “A”
and the other one from “B”
to “B”
( marked EXTERNAL).
Connect your signals (EVA modulator outputs) to IN1, IN2, IN3 etc. Connect
out to your measurement instrument and make sure that the combined signals
are at the same level. Connect the output (OUT) to your CATV or SMATV
network.
English
NOTE! It is very
important
that non used
inputs are terminated
with 75 ohm.
