21
4.12 At the end of your ride
If you have any questions, or if you feel anything about your A2B is
not as it should be, ask your A2B dealer before you ride again.
4.13 Your range
Factors affecting range:
• Pedal assist mode
• Battery state-of-charge
• Use of gears appropriate to speed
• Tyre inflation pressure
• Front wheel bearings and both brakes (tight bearings or a
dragging brake shoe reduces range)
• Rider weight (it takes more battery power to accelerate a
heavier person)
• Your speed and wind conditions (range is reduced when
pedalling hard against a strong wind)
• Terrain (travelling on a soft surface or climbing a hill uses
more power)
• Frequent starts and stops (full power from a standing start
draws the most amperage from the battery)
Maximise your range
• Fully charge your battery before each ride
• Check tyre pressure regularly and inflate to the pressure of 2.8
bar (40 psi) for front tyre and rear tyre
• Have your A2B serviced periodically to ensure that the wheel
bearings turn freely and both brake discs do not bind the brake
shoes when the brakes are not applied
• Minimise the weight that you carry
• Ride at slower speeds
• Use the economy mode as much as possible and support the
motor by pedalling with your own power
• Keep the chain and derailleur lubricated with bicycle
recommended chain spray
Summary of Contents for Hybrid/24
Page 1: ...1 Owner s manual Hybrid 24...
Page 2: ......
