Apple IIGS 8M RAM User’s Guide © a2heaven.com, 22 Nov 2016 Version 1.00
P a g e
|
5
IIGSRAM8M Installation
This chapter tells you how to install and test the IIGSRAM8M memory expansion
cards. Before you install your memory-expansion card, please be sure to read
Setting Up Your Apple IIGS and the Apple IIGS Owner's Guide, You'll need to be
particularly familiar with the Control Panel functions as this manual makes
frequent reference to the Control Panel menu.
Installation
1.
Turn off the computer.
Leave the computer plugged in but flip the power switch to the OFF
position.
2.
Remove the Apple ILGS cover.
Locate the two latches on either side of the backplate. Push in on the
latches while pulling up and back on the lid.
3.
Touch the power supply case.
This will discharge any static electricity that may be on your body. Do not
skip this step. Static electricity can ruin chips on the board and in the
computer.
4.
Remove the memory-expansion card from its anti-static bag.
Hold the card by the edges. Do not touch the gold fingers of the card.
5.
Position the memory expansion card over the Memory Expansion Slot
The Memory expansion slot is located in the front right corner of the
computer , see figure .
Summary of Contents for IIGS8MRAM
Page 1: ...Apple IIGS 8MB RAM User s Guide Copyright a2heaven com...
Page 2: ......
