RamExpress II+ User’s Guide © a2heaven.com, 22 Nov 2016 Version 1.01
P a g e
|
10
Press Return to set the time or use the ESC key to return to the Clock Utilities
menu without changing the clock.
If you enter a value outside the range of a particular setting (ex: Month = 13),
you will receive an error message and be returned
Load the Driver to Your ProDOS Boot Disks
To automatically install the proper clock driver each time the computer is
booted, install
DCLOCK.SYSTEM
on your ProDOS
•
Note: DCLOCK.SYSTEM requires 4 blocks of disk space.
To patch any ProDOS boot disks to recognize the clock, insert the write-enabled
disk to be modified into any disk drive and choose the option Install clock driver
on disk. The installation program will scan the system and display a list of
volumes currently on-line and their location. Select the target volume and press
the Return key. The
DCLOCK.SYSTEM
file will be inserted as the first system
program in the patched disk's directory. Each time the modified startup disk is
booted,
DCLOCK.SYSTEM
will be executed, displaying
DClock Copyright (c)
19— Applied Engineering
in the upper left corner of the screen; then the next
system program file in the disk
Whenever you create or modify ProDOS files under the modified operating
system, the files will be automatically tagged with the current date and time.
Also, any application programs which read the time and date directly from
ProDOS will now be .
About the RamExpress II+ Battery
What it is
The RamExpress II+ battery is a 3 volt, 20 millimeter lithium battery type
CR2032
with a life of about 1-2 years. You can order these batteries directly
from your local computer parts store or camera supplies store.
Replacing
To replace the battery, remove the memory expansion board. Remove the
battery by pushing on the top edge of the battery with a flat blade screwdriver.
Do not bend the clip up. The battery should pop out the bottom of the
connector.
Insert the new battery, positive (+) side up.
