RamExpress II+ User’s Guide © a2heaven.com, 22 Nov 2016 Version 1.01
P a g e
|
5
Ram Express II+ Installation
Apple
II
c computers with model number A2S4100 and A2S4500 contain the
connector and circuitry necessary to install a RamExpress II+ Memory
Expansion Card.
Apple
II
c computers with model number A2S4000 not have memory expand
connector and
not support
RamExpress II+ board!
Determine Logic Board Compatibility
1.
Turn off the power to the
II
c and disconnect the power cord and any
attached peripherals.
2.
Open
II
c Plastic case.
3.
Remove Keyboard (You cannot unplug connector only flip up keyboard)
4.
Compare the logic board with Figures 1 and 2. If the logic board looks like
the one shown in Figure 1 then a logic board is compatible with
RamExpress II+ .
Fig 1.
Fig 2.
Expansion Connector
