A2Z Ozone A-7000, Operating Manual

6

Operating Instructions

•  Plug ozone generator into an AC outlet
•  Set the timer and leave the area immediately. 
•  Come back at least 2-4 hours after the ozone generator stops.
•  Be sure to ventilate the room very well after the A-7000 has stopped producing ozone and 

the appropriate amount of time has passed. 

For Best Results

•  Before beginning ozone treatment, make sure the room is sealed completely, including 

vents.

•  Place the unit in the center of the room to ensure ozone is dispersed evenly.
•  As room size increases, treatment time should also increase.
•  Once the cycle is completed, allow 2-4 hours for ozone to dissipate before reentering. 
•  Ozone half-life is 30 minutes, meaning half of the ozone will dissipate after this amount 

of time has passed. 

•  For example, if running a 4-hour cycle, returning 6 to 8 hours later will ensure most of 

the ozone has reverted back to oxygen.

•  Do not ozonate a freshly painted room as it can have an adverse reaction with chemicals 

in the paint.

•  Ozone plates should be replaced after 2 years or 2000 hours of use or as needed.
• 

DO NOT USE near any oils or flammable fluids or solvents. This is a fire hazard. 

• 

DO NOT USE to treat any odors caused by flammable fluids or solvents. This is a health 

hazard.