INSTALLER/DEALER SETTINGS
Setting
Default
Description
Ambient Noise Threshold
100 dB
Set the threshold at which the Panel Ambient Noise Detector determines there is enough noise to
generate an alert. Choose from 80, 90, 100, 110 or 120 dB.
NOTE:
This setting is greyed out and
not selectable unless Panel Ambient Noise Detector is Enabled.
Zigbee Network Type
Home Automation
and Security
Choose which type of Zigbee network you’d like to use. Options are Home Automation and Security
or Smart Energy.
NOTE:
This setting only appears when a Zigbee daughter card is installed in the
Panel.
Delete All Sensors
Deletes all security sensors and Bluetooth devices programmed in the panel
Delete All Z-Wave Devices
Performs a factory reset on the Z-Wave controller. Does not factory reset previously included devices.
Zigbee Reset
Deletes all Zigbee sensors and resets the Zigbee Network
Master Reset*
Restores panel to factory settings and erases all content
Data Recycle
This feature erases all User data previously stored. (Wi-Fi SSID & Password, User Codes, Panel Camera Images, Custom
PhotoFrame Images, Message Center & Panel Event History).
IQ Remote Reset Authentication
Disabled
If Enabled, the IQ Remote will require authentication (Dealer or Installer Code) to master reset it.
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF
35
177
PROGRAMMING
Summary of Contents for Qolsys IQ Panel 2
