QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF
89
177
IQ REMOTE DEVICES
1. Connect the IQ Remote to the panel’s access point or
to the same Wi-Fi network the panel is connected to.
NOTE:
QW9102 & QW9103 IQ Remotes only support 2.4 GHz
networks. QW9104 IQ Remotes support both 2.4 GHz and 5 GHz.
2. Prior to pairing the IQ Remote to the panel you can
Test the connection by select TEST on the panel and
the remote.
3. Select “Pair” on the Panel and then Pair on the IQ
Remote to begin during this process the remote will
also download and update to the current software
version and reboot.
4. The remote device will pair to the panel and will show
that it is active on the list. You can then edit (device
name and sensor group), ping, delete or rediscover
the device if necessary
IQ Remote Devices
Pair up to 3 IQ Remote Secondary Touchscreens to the panel via the customer's network or the panel’s
built in access point.
NOTE:
The IQ Remote will automatically pair as Sensor Type “Keypad” and will appear on the
zone list in the order in which it is paired. Sensor Groups 0, 1 & 2 are available options for this
Sensor Type.
WI-FI DEVICES
Summary of Contents for Qolsys IQ Panel 2
