6
CHECK AND RESET
No Sound
Ensure the AC adapter is fully inserted into the AC outlet
and into the power connection input on the transmitter.
Ensure the headphone ON/OFF switch is in its ON position.
Headphone batteries may be too low. Charge batteries.
Ensure the computer or other audio source is on and tuned
to a channel with audio.
Adjust the volume control on the headphone to turn up
the volume.
The connected audio/video equipment is not playinq (CD,
Tape, etc.). Check the audio source.
Distortion
The volume of headphone is low, adjust the volume to your
listening level again
Ensure the stereo indicator light is on. If not, adjust
the tuning control on the headphone until the indicator
light “Red” is on.
Headphone batteries may be too low. Charge the batteries
or replace with new ones if they do not charge
The headphone is too far from transmitter, move closer
The input level of the audio signal is too low. Turn up
the volume of the audio source equipment.
FCC Caution
:To assure continued compliance, any changes or
modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this
equipment. (Example - use only shielded interface cables when
connecting to computer or peripheral devices).
