CAUTION:
DON'T attempt to expose UV light directly to the eyes or skin as an unshielded UV lamp may
cause injury!
1. Unplug before carrying maintenance.
2. Remove UV Lamp Assembly and filter pump from your aquarium.
3. Disconnect filter pump from UV Lamp Assembly
4. Install new UV Lamp Assembly reversing above sequence.
AA03W-UVC connects to AAUV3W water pump only.
Note: Do not try to disassemble the UV Lamp Assembly , it is sealed and not serviceable. ONLY
REPLACE AS AN ASSEMBLY.
TROUBLE SHOOTING GUIDELINES:
SYMPTOM
SOLUTION
Slow water; or the filter
pump doesn't work
- Clean Blue inlet filter of debris
- Check connection of plug
- Clean the filter pump (See “Maintenance”)
If the UV lamp
doesn't work
- Check connection of plug
- If the LED on the control box is OFF, a new UV Lamp
Assembly is required.
If there's still too
much algae
- For larger aquariums (over 80L / 20 US Ga), please use our
9W GKM.
- Minimize your “lights on” time (14hours max). Fish need time to
rest and algae growth is prompted by lighting.
- AA's Algae Cure (Model: AA003M) also helps to control algae growth.
Sponge
control box
Plug
LED indicator
Flow control
Pump
UV Lamp Assembly
Fig.5
To see more great “AA” products,
please visit us at www.aa-aquarium.com
Comments and Inquiries:
Please write to us at info@aa-aquarium.com
P4
