background image

 

2

Thank you for purchasing the AAD CUBII Acoustic Guitar Amplifier. A 
great deal of dedication and passion went into designing and building this 
no compromise, high performance compact guitar amplifier. It was 
conceived to be a dedicated amplifier for the “connoisseur” guitarist looking 
for the most accurate sound reproduction. Reading this manual will enable you 
to get the best performance from it so that you may enjoy many years of 
service. 
 

READ THIS FIRST 

 

 

Before using the CUBII please read ALL the instructions. 

 

On receipt of product, check for any signs of physical damage arising from 
shipping. If any damage is visible contact your dealer as soon as possible. 

 

If possible, keep all original packing. 

 

Do not use this amplifier in a way that would compromise its ventilation system. 
When operating, never cover the heat sink on rear panel. 

 

Do not locate this amplifier near any heat source. 

 

This amplifier must be connected only to a power source specified in this manual. 

 

For safety do not leave the amplifier plugged into a power source for long 
periods of time when not in use. 

 

Do not let any liquid or foreign objects fall into any openings on the amplifier. 

 

Never use this amplifier if it has: 

1. Suffered any physical damage. 
2. Been subjected to any liquids, rain or moisture.  
3. Damaged cables connected to it. 

If any of the above occurs, the amplifier should be examined by qualified service 
personnel. 

 

Always operate this amplifier with the correctly rated fuse. 

 

Never use this amplifier without proper grounding.

 

 

The mains plug is used as disconnect device, the disconnect device shall 
remain readily operable. 

 

 

Protective earthing terminal. The apparatus should be connected to a 

mains socket outlet with a protective earthing connection. 

 

 Correct Disposal of this product. This marking indicates that this product 

should not be disposed with other household wastes throughout the EU. To 
prevent possible harm to the environment or human health from 
uncontrolled waste disposal, recycle it responsibly to promote the sustainable 
reuse of material resources. 

 

The apparatus shall not be exposed to dripping or splashing.

 

Summary of Contents for CUBII











Reviews: