AMB-2020HT(T)-E User’s Manual
21
Standard CMOS Setup
“Standard CMOS Setup” choice allows you to record some basic hardware configurations in your
computer system and set the system clock and error handling. If the Embedded Little Board is already
installed in a working system, you will not need to select this option. You will need to run the Standard
CMOS option, however, if you change your system hardware configurations, the onboard battery fails, or
the configuration stored in the CMOS memory was lost or damaged.
ROM PCI/ISA BIOS
STANDARD CMOS SETUP
AWARD SOFTWARE, INC.
Date (mm:dd:yy) :
Mon
, Aug 19 1996
Time (hh:mm:ss) :
00 : 00 : 00
HARD DISKS
TYPE
SIZE
CYLS
HEAD
PRECOMP LANDZ SECTOR MODE
Primary Master
Auto
0
0
0
0
0
0
Auto
Primary Slave
None
0
0
0
0
0
0
-----
Secondary Master
None
0
0
0
0
0
0
-----
Secondary Slave
None
0
0
0
0
0
0
-----
Drive A
: 1.44M, 3.5in
Base Memory
:
640K
Drive B
: None
Extended
Memory
:
15360K
Floppy 3 Mode Support
: Disabled
Other Memory
:
384K
Video
: EGA / VGA
Halt On
: All Errors
Total Memory
:
16384K
ESC : Quit
á
â
à
ß
: Select
Item
PU / PD / + / - : Modify
F1 : Help
(Shift) F2 : Change Color
At the bottom of the menu are the control keys for use on this menu. If you need any help in each item
field, you can press the <F1> key. It will display the relevant information to help you. The memory
display at the lower right-hand side of the menu is read-only. It will adjust automatically according to the
memory changed. The following describes each item of this menu.
Date
The date format is:
Day :
Sun to Sat
Month :
1 to 12
Date :
1 to 31
Year :
1994 to 2009
To set the date, highlight the “Date” field and use the PageUp/ PageDown or +/- keys to set the current
time.
Time
The time format is:
Hour : 00 to 23
Minute : 00 to 59
Second : 00 to 59
To set the time, highlight the “Time” field and use the <PgUp>/ <PgDn> or +/- keys to set the current
time.